rename(2) — Linux manual page

NAME \| LIBRARY \| SYNOPSIS \| DESCRIPTION \| RETURN VALUE \| ERRORS \| STANDARDS \| HISTORY \| BUGS \| SEE ALSO \| COLOPHON

 rename(2)                  System Calls Manual                  rename(2)

NAME top

        rename, renameat, renameat2 - change the name or location of a        file

LIBRARY top

        Standard C library (libc, -lc)

SYNOPSIS top

        #include <stdio.h>         int rename(const char *oldpath, const char *newpath);         #include <fcntl.h>           /* Definition of AT_* constants */        #include <stdio.h>         int renameat(int olddirfd, const char *oldpath,                     int newdirfd, const char *newpath);        int renameat2(int olddirfd, const char *oldpath,                     int newdirfd, const char *newpath, unsigned int flags);     Feature Test Macro Requirements for glibc (see    feature_test_macros(7)):         renameat():            Since glibc 2.10:                _POSIX_C_SOURCE >= 200809L            Before glibc 2.10:                _ATFILE_SOURCE         renameat2():            _GNU_SOURCE

DESCRIPTION top

rename() renames a file, moving it between directories if required. Any other hard links to the file (as created using link(2)) are unaffected. Open file descriptors for oldpath are also unaffected. Various restrictions determine whether or not the rename operation succeeds: see ERRORS below. If newpath already exists, it will be atomically replaced, so that there is no point at which another process attempting to access newpath will find it missing. However, there will probably be a window in which both oldpath and newpath refer to the file being renamed. If oldpath and newpath are existing hard links referring to the same file, then rename() does nothing, and returns a success status. If newpath exists but the operation fails for some reason, rename() guarantees to leave an instance of newpath in place. oldpath can specify a directory. In this case, newpath must either not exist, or it must specify an empty directory. If oldpath refers to a symbolic link, the link is renamed; if newpath refers to a symbolic link, the link will be overwritten. renameat() The renameat() system call operates in exactly the same way as rename(), except for the differences described here. If the pathname given in oldpath is relative, then it is interpreted relative to the directory referred to by the file descriptor olddirfd (rather than relative to the current working directory of the calling process, as is done by rename() for a relative pathname). If oldpath is relative and olddirfd is the special value AT_FDCWD, then oldpath is interpreted relative to the current working directory of the calling process (like rename()). If oldpath is absolute, then olddirfd is ignored. The interpretation of newpath is as for oldpath, except that a relative pathname is interpreted relative to the directory referred to by the file descriptor newdirfd. See openat(2) for an explanation of the need for renameat(). renameat2() renameat2() has an additional flags argument. A renameat2() call with a zero flags argument is equivalent to renameat(). The flags argument is a bit mask consisting of zero or more of the following flags: RENAME_EXCHANGE Atomically exchange oldpath and newpath. Both pathnames must exist but may be of different types (e.g., one could be a non-empty directory and the other a symbolic link). RENAME_NOREPLACE Don't overwrite newpath of the rename. Return an error if newpath already exists. RENAME_NOREPLACE can't be employed together with RENAME_EXCHANGE. RENAME_NOREPLACE requires support from the underlying filesystem. Support for various filesystems was added as follows: • ext4 (Linux 3.15); • btrfs, tmpfs, and cifs (Linux 3.17); • xfs (Linux 4.0); • Support for many other filesystems was added in Linux 4.9, including ext2, minix, reiserfs, jfs, vfat, and bpf. RENAME_WHITEOUT (since Linux 3.18) This operation makes sense only for overlay/union filesystem implementations. Specifying RENAME_WHITEOUT creates a "whiteout" object at the source of the rename at the same time as performing the rename. The whole operation is atomic, so that if the rename succeeds then the whiteout will also have been created. A "whiteout" is an object that has special meaning in union/overlay filesystem constructs. In these constructs, multiple layers exist and only the top one is ever modified. A whiteout on an upper layer will effectively hide a matching file in the lower layer, making it appear as if the file didn't exist. When a file that exists on the lower layer is renamed, the file is first copied up (if not already on the upper layer) and then renamed on the upper, read-write layer. At the same time, the source file needs to be "whiteouted" (so that the version of the source file in the lower layer is rendered invisible). The whole operation needs to be done atomically. When not part of a union/overlay, the whiteout appears as a character device with a {0,0} device number. (Note that other union/overlay implementations may employ different methods for storing whiteout entries; specifically, BSD union mount employs a separate inode type, DT_WHT, which, while supported by some filesystems available in Linux, such as CODA and XFS, is ignored by the kernel's whiteout support code, as of Linux 4.19, at least.) RENAME_WHITEOUT requires the same privileges as creating a device node (i.e., the CAP_MKNOD capability). RENAME_WHITEOUT can't be employed together with RENAME_EXCHANGE. RENAME_WHITEOUT requires support from the underlying filesystem. Among the filesystems that support it are tmpfs (since Linux 3.18), ext4 (since Linux 3.18), XFS (since Linux 4.1), f2fs (since Linux 4.2), btrfs (since Linux 4.7), and ubifs (since Linux 4.9).

RETURN VALUE top

        On success, zero is returned.  On error, -1 is returned, and errno        is set to indicate the error.

ERRORS top

EACCES Write permission is denied for the directory containing oldpath or newpath, or, search permission is denied for one of the directories in the path prefix of oldpath or newpath, or oldpath is a directory and does not allow write permission (needed to update the .. entry). (See also path_resolution(7).) EBUSY The rename fails because oldpath or newpath is a directory that is in use by some process (perhaps as current working directory, or as root directory, or because it was open for reading) or is in use by the system (for example as a mount point), while the system considers this an error. (Note that there is no requirement to return EBUSY in such cases— there is nothing wrong with doing the rename anyway—but it is allowed to return EBUSY if the system cannot otherwise handle such situations.) EDQUOT The user's quota of disk blocks on the filesystem has been exhausted. EFAULT oldpath or newpath points outside your accessible address space. EINVAL The new pathname contained a path prefix of the old, or, more generally, an attempt was made to make a directory a subdirectory of itself. EISDIR newpath is an existing directory, but oldpath is not a directory. ELOOP Too many symbolic links were encountered in resolving oldpath or newpath. EMLINK oldpath already has the maximum number of links to it, or it was a directory and the directory containing newpath has the maximum number of links. ENAMETOOLONG oldpath or newpath was too long. ENOENT The link named by oldpath does not exist; or, a directory component in newpath does not exist; or, oldpath or newpath is an empty string. ENOMEM Insufficient kernel memory was available. ENOSPC The device containing the file has no room for the new directory entry. ENOTDIR A component used as a directory in oldpath or newpath is not, in fact, a directory. Or, oldpath is a directory, and newpath exists but is not a directory. ENOTEMPTY or EEXIST newpath is a nonempty directory, that is, contains entries other than "." and "..". EPERM or EACCES The directory containing oldpath has the sticky bit (S_ISVTX) set and the process's effective user ID is neither the user ID of the file to be deleted nor that of the directory containing it, and the process is not privileged (Linux: does not have the CAP_FOWNER capability); or newpath is an existing file and the directory containing it has the sticky bit set and the process's effective user ID is neither the user ID of the file to be replaced nor that of the directory containing it, and the process is not privileged (Linux: does not have the CAP_FOWNER capability); or the filesystem containing oldpath does not support renaming of the type requested. EROFS The file is on a read-only filesystem. EXDEV oldpath and newpath are not on the same mounted filesystem. (Linux permits a filesystem to be mounted at multiple points, but rename() does not work across different mount points, even if the same filesystem is mounted on both.) The following additional errors can occur for renameat() and renameat2(): EBADF oldpath (newpath) is relative but olddirfd (newdirfd) is not a valid file descriptor. ENOTDIR oldpath is relative and olddirfd is a file descriptor referring to a file other than a directory; or similar for newpath and newdirfd The following additional errors can occur for renameat2(): EEXIST flags contains RENAME_NOREPLACE and newpath already exists. EINVAL An invalid flag was specified in flags. EINVAL Both RENAME_NOREPLACE and RENAME_EXCHANGE were specified in flags. EINVAL Both RENAME_WHITEOUT and RENAME_EXCHANGE were specified in flags. EINVAL The filesystem does not support one of the flags in flags. ENOENT flags contains RENAME_EXCHANGE and newpath does not exist. EPERM RENAME_WHITEOUT was specified in flags, but the caller does not have the CAP_MKNOD capability.

STANDARDS top

        rename()               C11, POSIX.1-2008.         renameat()               POSIX.1-2008.         renameat2()               Linux.

HISTORY top

        rename()               4.3BSD, C89, POSIX.1-2001.         renameat()               Linux 2.6.16, glibc 2.4.         renameat2()               Linux 3.15, glibc 2.28.     glibc notes        On older kernels where renameat() is unavailable, the glibc        wrapper function falls back to the use of rename().  When oldpath        and newpath are relative pathnames, glibc constructs pathnames        based on the symbolic links in /proc/self/fd that correspond to        the olddirfd and newdirfd arguments.

BUGS top

        On NFS filesystems, you can not assume that if the operation        failed, the file was not renamed.  If the server does the rename        operation and then crashes, the retransmitted RPC which will be        processed when the server is up again causes a failure.  The        application is expected to deal with this.  See link(2) for a        similar problem.

COLOPHON top

        This page is part of the man-pages (Linux kernel and C library        user-space interface documentation) project.  Information about        the project can be found at         ⟨https://www.kernel.org/doc/man-pages/⟩.  If you have a bug report        for this manual page, see        ⟨https://git.kernel.org/pub/scm/docs/man-pages/man-pages.git/tree/CONTRIBUTING⟩.        This page was obtained from the tarball man-pages-6.10.tar.gz        fetched from        ⟨https://mirrors.edge.kernel.org/pub/linux/docs/man-pages/⟩ on        2025-02-02.  If you discover any rendering problems in this HTML        version of the page, or you believe there is a better or more up-        to-date source for the page, or you have corrections or        improvements to the information in this COLOPHON (which is not        part of the original manual page), send a mail to        [email protected]  Linux man-pages 6.10            2024-07-23                      rename(2)

Pages that refer to this page: exch(1), mv(1), fcntl(2), io_uring_enter2(2), io_uring_enter(2), link(2), open(2), rmdir(2), symlink(2), syscalls(2), unlink(2), io_uring_prep_rename(3), io_uring_prep_renameat(3), remove(3), cpuset(7), inotify(7), signal-safety(7), symlink(7), lsof(8), mount(8)